420 mm 2-frame honey extractor BeeFun® plastic valve

420 mm 2-frame manual honey extractor from the brand BeeFun. This honey extractor has a stainless steel tank with very sturdy blue coated legs and a plastic gate valve and brake. The basket inside the extractor has a small mesh size without sharp edges and is suitable for hive frames up to a maximum size of 42 x 25 cm. The tank has a sloping bottom so that no honey remains in the extractor. To catch the honey from the plastic gate valve, there is space for a bucket with a maximum height of 33 cm. The gate valve is made of plastic with a rubber ring so that the valve does not leak, and the gate valve is positioned extra low in the bottom.

This honey extractor is manufactured in Europe.

Additional details:

• Inner diameter of gate valve: 4.2 cm
• Honey extractor material: stainless steel
• Lid: plastic
• Reinforcement band at the bottom of the tank
• Wooden crank handle
• Height of honey extractor: 110 cm
• Height of tank: 60 cm
• Thickness of stainless steel tank: 0.5 mm
• Equipped with a brake

Need advice? Feel free to contact us.

Please note: this extractor is delivered as an assembly kit. This means that both the legs and the crank arm etc. still need to be assembled. The tank with drive weighs approximately 18.5 kg and the legs 4.5 kg.

Tip: Rubber feet so that the extractor slides less during extraction. The floor is also protected against scratches with these rubber feet.