520 mm 3-raams honingslinger (BeeFun)

520 mm 3-row manual honey crank from the BeeFun brand. This honey pendulum has a stainless steel barrel with very solid blue coated legs and a stainless steel cutting tap. The basket inside the pendulum has a small mesh with no sharp edges and is suitable for windows up to a maximum size of 44 x 34 cm. The vessel has a sloping bottom so that no honey remains in the crank. To collect the honey from the stainless steel cutting tap, there is room for a bucket with a maximum height of 33 cm. The cutting tap is made of stainless steel with a rubber ring so the tap does not leak and the cutting tap sits extra low in the bottom.

This honey garland is manufactured in Europe.

Other data:

• Inside diameter of cutting tap: 4.5 cm
• Material honey pendulum: stainless steel
• Lid: plastic
• Reinforcement strap at the bottom of the barrel
• Wooden pendulum handle
• Height of honey pendulum: 110 cm
• Height of barrel: 59 cm
• Thickness of the stainless steel barrel is 0.5 mm

This sling fits 3 simplex hatchery windows or 6 simplex hatchery windows.

Looking for advice? Please feel free to contact us.

Note: This pendulum is delivered as a "construction" package. This means that both the legs and the pendulum arm ect. still need to be assembled. The barrel with drive weighs about 18.5 kg and the legs 4.5 kg.

Tip: Rubber voetjes so the pendulum will slide less when swinging. The floor is also protected from scratches with these rubber feet.