€ 5,25
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Cover plate of transparent plastic, among other things suitable for on the saving cabinet. The dimensions are 47 x 41 cm x 1mm. The width size can change between 41 cm and 42 cm. Both fit on the Savings Cabinet. Made of thick transparent plastic so viewing through is possible.
Tip: before use, remove any protective film and put a plastic cover plate not...
€ 32,95
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Beautiful glass cover shelf for the hive. This way you can admire the bees from above every day. The cover shelf is made of flat glass and CNC ground. This means that the sides are beautifully rounded. And, not unimportant: the hive chisel goes under it easily and the boards come off easily too, even if they are completely stuck with propolis. The 6 mm...
€ 41,95
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Beautiful glass cover shelf, with hole for feed or bee outlet, for on the hive. This way you can admire the bees from above every day. The cover shelf is made of flat glass and CNC ground. This means that the sides are nicely rounded. And not unimportantly, the hive chisel goes under it easily and the boards also come off easily, even though they are...
Deck board extra thick (8 mm) for pine/red cedar wood saving cabinet with or without bee outlet opening. Comes without edge, but is extra sturdy due to its thickness. When ordering, choose where you want the bee outlet or feed opening in the cover shelf. You can also choose a deck shelf without a feed opening. Wood type: Russian birch FSC, waterproof...
€ 3,95
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Cover plate made of thin plastic for the Segeberger hive. This plastic cover board is preformed and thus falls over the inner edges of the brood/hive chamber. The dimensions of the cover board are 48,5 x 48,5 cm.Notice: the incubator shown is not included.Tip: before use, remove any protective film and put a plastic cover plate not unprotected in the...
€ 5,45
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Cover plate made of plastic for on the Segeberger hive. The dimensions are 43,5 x 43,5 cm and 1 mm thick.
Notice: The incubator and Hoffmann windows shown are not included.
Tip: before use, remove any protective film and put a plastic cover plate not unprotected in the bright sun.
€ 40,65
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Beautiful glass cover shelf for the Segeberger hive. This way you can admire the bees from above every day. The cover shelf is made of flat glass and CNC ground. This means that the sides are beautifully rounded. And, not unimportant: the hive chisel goes under it easily and the boards come off easily too, even if they are completely stuck with propolis....
€ 4,35
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Plastic cover board for the Segeberger cabinet. This plastic cover board is only 0,4 mm thick and has the dimension 43,5 x 43,5 cm. Tip: before use, remove any protective film and put a plastic cover plate not unprotected in the bright sun.
€ 4,45
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Cover plate made of plastic, suitable for a Simplex six-ram cabinet. Dimensions are 26.2 x 47.3 cm x 1 mm. Made transparent plastic so that see-through is possible. Notice: the incubator becomes not included!Tip: before use, remove any protective film and put a plastic cover plate not unprotected in the bright sun.
Beautiful glass deck shelf, with a small feed hole 5 cm in diameter. This glass cover shelf is suitable for six-window hives. This also allows you to admire the bees from above every day and keep an eye on the growth of the small hive. The cover shelf is made of flat glass and CNC ground. This means that the sides are nicely rounded. Last but not least,...
€ 4,35
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Deck shelf of plastic designed for the [product id=579]EPS 6-ramer[/product]. This deck board measures 48.7 x 25.3 cm and is 1 mm thick.
Tip: before use, remove any protective film and put a plastic cover plate not unprotected in the bright sun.
€ 10,95
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Deck shelf for the Warré hive to allow easy feeding with a normal plastic feeder. The plastic feeder can simply be placed under the pointed roof of the feeder.
This deck board is suitable for the following feeders:
[product id=543]Voerbak, 2 liter geel (art. nummer 1148)[/product]
[product id=1571]Voerbakje 1,5 liter oranje (art. nummer...
€ 9,85
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Deck shelf without feed hole for the Warré hive. Thus, this wooden Warré deck plan does not have a feed hole and is intended for normal daily use in the Warré hive.
€ 24,15
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Beautiful glass cover shelf for the Warré hive. This allows you to beautifully admire the bees from above. The cover shelf is made of flat glass and CNC ground. This means that the sides are beautifully rounded. And, not unimportant: the hive chisel goes under it easily and the boards come off easily too, even though they are completely glued with...
€ 32,95
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Beautiful glass cover shelf for the Simplex BE hive and polystyrene BeeFun hive. This allows you to admire the bees beautifully from above. The cover shelf is made of flat glass and CNC ground. This means that the sides are ground nice and round and, not unimportantly, the hive chisel goes under it easily and the glass plate also comes off easily. Even if...
€ 5,45
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Cover plate made of plastic suitable for the BeeFun polystyrene hive, among others. The dimensions are 45.6 x 45.6 cm. Made of transparent plastic so that viewing through is possible without disturbing the bees.
Notice: the incubator shown is not included.Tip: before use, remove any protective film and put a plastic cover plate not unprotected in the...
€ 12,05
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Deck board with feed hole in the middle for the Langstroth single-walled hive. This cover shelf is made of wood and is used as a closure for on a brood or honey chamber. The size of the cover shelf is 50 cm x 43 cm.
€ 12,05
This product is ordered, delivery time is approximately 14 days.
This product is ordered, delivery time is approximately 14 days.
Deck board with feed hole in the middle for the Langstroth double-walled hive. This cover shelf is made of wood and is used as a closure for on a brood or honey chamber. The size of the cover shelf is 53.2 cm x 42.2 cm.
€ 5,45
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Cover plate of plastic suitable for, among others, on the Dadant Blatt cabinets. The dimensions are 50 x 43 cm x 1 mm. Made of transparent plastic so that see-through is possible. Tip: before use, remove any protective film and put a plastic cover plate not unprotected in the bright sun.
€ 5,45
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Cover plate of plastic suitable for, among others, on the plastic Dadant Blatt cabinets. The dimensions are 45.3 x 54.3 cm. Made of transparent plastic so that viewing through is possible without disturbing the bees.Tip: before use, remove any protective film and put a plastic cover plate not unprotected in the bright sun.
€ 3,25
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Plastic deck shelf, suitable for on the MiniPlus cabinets. The dimensions are 27 x 27 cm x 1 mm thick. Made of transparent plastic so that it is easy to look into the MiniPlus cabinet to follow the developments in the census. Tip: before use, remove any protective film and put a plastic cover plate not unprotected in the bright sun.
€ 2,95
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Deck board made of transparent plastic, suitable for the Kieler fertilization box. The dimensions are 19.5 x 25 cm x 1 mm. Made of transparent plastic for easy viewing inside the box.Tip: before use, remove any protective film and put a plastic cover plate not unprotected in the bright sun.
€ 2,95
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Cover shelf made of plexiglass (plastic) for the Apidea fertilization cabinet. This cover shelf measures 19.2 x 11.8 cm and fits exactly on the Apidea box.
€ 27,45
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Savings cabinet insulation deck board with the size 47.1 x 42.2 cm. This deck board is made of bamboo and pine wood and has excellent insulating properties.
€ 6,55
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Cover plate made of plastic suitable for the Dadant hive. The dimensions are 50.9 x 50.9 cm. Made of transparent plastic 1 mm thick so that looking through it is possible without disturbing the bees.
Tip: before use, remove any protective film and put a plastic cover plate not unprotected in the bright sun.
€ 5,45
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Plastic cover plate suitable for a German Normal hive. The dimensions are 52 x 42 cm x 1mm. Made of transparent plastic so that see-through is possible. Tip: before use, remove any protective film and put a plastic cover plate not unprotected in the bright sun.
Deck shelf for pine or red cedar thrift box made of wood with or without bee outlet hole. Comes with frame. When ordering, choose where you want the bee outlet or feed opening in the deck shelf. You can also choose a cover shelf without a feed opening. Wood type: okoume komo FSC, waterproof glued wood for outdoor use. To best protect the cover board from...
Deck board for the WBC or simplex hive with or without bee outlet/feeder with the dimension 45,5 x 40,5 cm. Supplied without frame. When ordering, choose where you want the bee outlet or feed opening in the cover shelf. You can also choose a cover shelf without a feed opening. Wood type: okoume komo FSC, waterproof glued wood for outdoor use. If you want...
€ 8,75
This product is ordered, delivery time is approximately 14 days.
This product is ordered, delivery time is approximately 14 days.
Deck board for the sixramer made of wood. This deck shelf has the dimension 47 x 26 cm. The deck board has a feed opening in the middle with a diameter of 6 cm.
Deck shelf, made of wood , for the hive beehive. This deck shelf has a feed hole on the front which is slightly inclined to one side. Which is no problem for both the bee outlet and feeders. The deck shelf is nicely finished with a frame. The size is 47.2 x 42.1 cm.