Beekeepers use cutting taps for filling jars of honey. Since honey is very sticky and syrupy, this is the ideal tap. With some models, it is possible to turn an ordinary bucket itself into a ripener to easily fill honey.
Brass honey gate, with an outer diameter of 40 mm suitable for replacement in honey extractors or honey tanks. A honey gate that needs to be screwed onto the desired product.
€ 565,95
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Pneumatic valve for the 30, 50 and 70 liter honey tanks with valve. The valve is connected to a compressor or similar and can be operated with a foot pedal. This keeps your hands free when filling honey into jars. Made of stainless steel and fits on the 38 mm (6/4') cutting valve.
This dispensing valve fits on 50, 70 and 100 liter tanks.
€ 5,45
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Tap for the lower container of the sugar melter. This tap ensures a straight stream so you can easily drain the sugar. Made of plastic with an outlet diameter of 8 mm. The thread diameter is 24 mm.
€ 6,55
In stock and available for immediate delivery.
In stock and available for immediate delivery.
Plastic yellow honey gate valve for making your own honey bucket with valve or as a spare part. The inner diameter is 40 mm and the outer diameter of the thread is approximately 43 mm. The valve comes with a stainless steel screw and wing nut and includes 2 rubber seals. Please note, this valve is basic quality, not suitable for intensive use and may leak...
€ 24,15
This product is ordered, delivery time is approximately 21 days.
This product is ordered, delivery time is approximately 21 days.
Honey gate valve, made of a stainless food-grade alloy (anti-oxidizing/rust-proof), with an external thread diameter of 44 mm and an internal diameter of 38 mm. Suitable for replacement in honey extractors or honey tanks. Comes with a locking nut so it can also be installed between components. The honey gate valve is equipped with two rubber rings.
€ 3,25
This product is ordered, delivery time is approximately 14 days.
This product is ordered, delivery time is approximately 14 days.
Rubber spare ring for the honey buckets with a capacity of [product id=2115]25 L [/product]and [product id=2117]35 L[/product] from the brand BeeFun.
Note: this ring is only suitable for the honey buckets of the brand BeeFun.
€ 275,95
In stock and available for immediate delivery.
In stock and available for immediate delivery.
This handy piston valve makes it super easy to manually fill a honey jar with the right amount. The diameter of the valve is 32 mm and 38 mm.
Note: Only to be used on the 30 liter and 70 liter stainless steel honey tanks.
Stainless steel honey gate with an outer diameter including thread of 47 mm and an inner diameter of 40 mm, fitting the Lega honey extractor. Of course, this honey gate can also be used in combination with other products if the size is the same, such as honey tanks or honey extractors.
€ 302,45
This product is ordered, delivery time is approximately 21 days.
This product is ordered, delivery time is approximately 21 days.
With this manual universal dosing valve "6/4" you can fill a jar of honey even more precisely than with a standard honey gate. By pulling the handle down, the valve opens itself and the honey jar under the valve is filled very accurately. This is definitely recommended for filling a large number of jars at once.
This dosing valve fits on tanks of 50, 70...
€ 3,60
In stock and available for immediate delivery.
In stock and available for immediate delivery.
With this set, the rubber rings can be replaced for the plastic 1.5' (38mm) honey gate. This can be useful in case of loss or wear of these rings. The set consists of a round ring and a sealing ring to place between the gate and the tank. It is always advisable to lightly grease the rings with petroleum jelly. This ensures an even better seal.
A honey gate is used for filling jars with honey. The brass honey gate has an outer diameter including thread of 47 mm and an inner diameter of 40 mm. A practical valve that lasts a long time.
Plastic ring 47 mm for a Lega valve. This ring is a spare part from Lega. If your plastic ring is worn out or broken, it's useful to measure the required ring size. If the size matches 47 mm, you can use this ring.