English 
Español 
Italiano Parts for garlands
Need a part for your pendulum? You can find it here. For example: rubber feet for under the honey crank to protect the floor from scratches and prevent the crank from sliding or a ball bearing for your honey crank. Is your part not listed? Please contact us.
-
Food safe lubricant for honey slings 15 cc
€ 4,35 In stock and available for immediate delivery.High quality industrial food grade grease/lubricant for greasing the ball of a honey crank, 15 cc cup. Use to make your honey crank turn smoothly again.View more -
Rubber feet for the honey crank
€ 14,95 Out of stockOut of stock3 Rubber feet that can be mounted under the honey pendulum including nuts and washers. These ensure that the pendulum slides less and these pendulum feet also protect the floor from scratches.These feet are universal and thus fit almost all honey garlands that have a 6 mm hole in the legs. In case there is no hole or too small a hole in the legs of the...View more -
Honey pendulum protective cover - BeeFun®
€ 32,95 In stock and available for immediate delivery.Protective cover for a honey crank with a maximum diameter of 520 mm. The cover is made in teardrop shape which also allows a honey pendulum handle to fit under it. With this cover you will keep the pendulum nice and clean for another round of pendulums!View more -
Electric motor for honey slings
€ 249,95 In stock and available for immediate delivery.Kit to make your manual honey crank suitable for drive with electricity. With this set you can turn your manual honey crank into an electric crank relatively easily. The set consists of: Control module with which the motor can be turned up and down, also transformer to 24 volts Motor of 24 volts, 120 watts Transmission mechanism to the right speed and...View more -
12.7 mm ball / ball bearing for honey slings
€ 2,99 In stock and available for immediate delivery.Ball for in the ball bearing of most honey slings. This ball is 12.7 mm in diameter and may well be lost during cleaning and honey slinging. This ball is in use on several models of honey slings.View more -
9.5 mm ball / ball bearing for BeeFun® honey slings
€ 2,99 In stock and available for immediate delivery.Ball for in the ball bearing of the BeeFun honey slings. This ball has a diameter of 9.5 mm and may well be lost during cleaning and honey slinging. The 9.5 mm ball is especially suitable for BeeFun honey slings.View more -
8 mm ball / ball bearing for Lyson/Lega honey slings
€ 2,99 In stock and available for immediate delivery.Ball for in the ball bearing of most honey slings. This ball is 8 mm in diameter and can sometimes get lost during cleaning and honey slinging. The 8 mm ball is commonly used in the Lyson and Lega honey slings.View more -
Ball bearing 28 mm / 12 mm for Lega crank
€ 4,95 In stock and available for immediate delivery.Ball bearing for in the larger Lega honey slings. This bearing has a diameter of 28 mm and an inner diameter of 12 mm. The bearing may eventually need replacement. We always recommend keeping a spare bearing in stock.View more -
Lid Lyson Ø500 mm, without handle
€ 25,95 This product is in stock.Spare lid for a Lyson honey crank with a diameter of 500 mm. This half spare lid has no handle.View more -
Lid Lyson Ø500 mm, with handle
€ 32,95 This product is in stock.Spare lid for a Lyson honey crank with a diameter of 500 mm. This half spare lid has a handle.View more -
Set of lids Lyson Ø500 mm
€ 49,95 This product is in stock.Set of spare lids for a Lyson honey crank with a diameter of 500 mm.View more -
Plastic tap for LEGA crank (47 mm)
€ 12,95 In stock and available for immediate delivery.Nylon faucet for the LEGA honey slings. The outside size of the crane is 45 mm, the inside size of the crane is 40 mm.View more -
New honey pendulum hive
A honey pendulum may require a new basket. The pendulum basket can be made in several ways. With coarse mesh, this is called a braided basket or a basket with punched mesh. Punched mesh is very fine, but also means more cleaning work. For a new basket, the length of the shaft is important and the shaft size. So to give a price quote for a honeyling...View more -
Spare lid with red button honey crank 500 mm
€ 42,95 In stock and available for immediate delivery.Spare lid for the [product id=559]500 mm 3-raams honingslinger (Basis)[/product] (art. 1163). This is the spare cover part which opens and to which the red button is attached.Notice: this lid is only suitable for the honey crank mentioned above.View more -
Tri clamp / hinged bracket 40 mm
€ 24,95 In stock and available for immediate delivery.Tri clamp / hinged bracket for connecting hose grommet male threads of 40 mm.View more -
Tri clamp / hinged bracket 50 mm
€ 19,95 This product is ordered, delivery time is approximately 14 days.Tri clamp / hinged bracket for connecting hose grommet male threads of 50 mm.View more -
Ring for coupling rubber (6/4) 38 mm
€ 5,95 In stock and available for immediate delivery.Ring for coupler (6/4) 38 mm made of rubber to seal different parts. Useful as a spare part or if another ring is in the wash.View more -
Sealing ring rubber 50 mm
€ 5,45 In stock and available for immediate delivery.Sealing ring rubber 50 mm. Use this ring to connect two hose grommet male threads together with a tri clamp.View more -
Rubber ring for coupling (5/4) 31 mm
€ 5,95 This product is ordered, delivery time is approximately 14 days.Rubber ring for coupling (5/4) 31 mm which seals different parts. Useful as a spare part or when the other ring is in the wash.View more -
Hose grommet male thread with coupling ring 50 mm
€ 26,95 In stock and available for immediate delivery.Hose grommet male thread with coupling ring 50 mm made of stainless steel.View more -
Hose grommet male thread with coupling ring 40 mm
€ 26,95 In stock and available for immediate delivery.Hose grommet male thread with coupling ring 40 mm made of stainless steel.View more -
Set of gears LEGA
€ 11,95 This product is ordered, delivery time is approximately 21 days.Set of two nylon gears for the Lega honey crank. The set consists of a large gear of about 85 mm and a small gear of about 30 mm. Suitable for a 12 mm shaft.View more -
LEGA gear cover
€ 7,95 In stock and available for immediate delivery.Protective cover for the two nylon gears of the Lega honey crank. The protective cover ensures that the gears are protected from dirt and it also provides protection for safer working.View more -
Lever gray LYSON
€ 32,95 In stock and available for immediate delivery.Gray lever with handle for the Lyson honey garland. Made of aluminum and powder coated. This honey crank handle / lever comes with a pin for attachment.View more -
Set of lids LEGA crank 520 mm
€ 54,95 This product is ordered, delivery time is approximately 21 days.Set of two transparent lids, with mounting hardware, for the Lega honey crank 520 mm. The set thus consists of two "half" lid parts and two plastic mounting plates with the necessary screws.View more -
Connector for drain barrel with small connection, outlet 38 mm
€ 158,35 In stock and available for immediate delivery.Coupling with which various components such as a drain barrel, ripener, filter, honey crank etc. can be provided with a tap and connection to a hose so that it can be reconnected to a pump or filling machine. Connection size for drain valves of 38mm hole.View more -
Coupling piece for drain vessel with large connection, outlet 38 mm
€ 164,95 In stock and available for immediate delivery.Coupling piece with which various components such as a draining vessel, ripener, filter, honey crank etc. can be provided with a tap and connection to a hose so that it can be reconnected to a pump, filling machine etc. Connection size for drain valves of 38mm hole.View more -
Connector for hoses 51 mm (2'')
€ 102,25 In stock and available for immediate delivery.Coupling piece of 51 mm with which different parts, such as a drain barrel, ripener, filter, honey crank etc., can be provided with a connection to a hose so that it can be connected again to a pump or filling machine. Connection size on the cutting tap is 51 mm / 5/4. The coupling piece is supplied including easy hose clamp but without crane.View more -
Connector for hoses 38 mm (6/4)
€ 102,25 This product is ordered, delivery time is approximately 14 days.Coupling piece 38 mm with which various parts such as a drain barrel, ripener, filter, honey crank etc. can be provided with a connection to a hose so that it can be connected again to a pump or filling machine. Connection size on the cutting tap is 6/4 38mm. The connector is supplied including easy hose clamp and without crane.View more -
Cassette crank reducer
€ 32,95With this cassette crank reducer you can easily raise the bottom in the cassettes of the Lyson cranks. this ensures that in addition to large windows, you can also easily take smaller windows out of the cassettes. We recommend this cassette reducer for example simplex windows but also german normal (DNM).View more -
Honey garland bag
€ 10,95 In stock and available for immediate delivery.The honey sling bag made of nylon is ideal for slinging unseal wax. The seals come loose from the top side of the comb during the unsealing process at the honey harvest. You place these in the bag and hang the bag on the inside of the pendulum. The sieve bag has a size of 440 x 200 mm and can be attached to the crank with a bracket. Tip: Use multiple...View more -
Honey garland bag fine
€ 10,95 In stock and available for immediate delivery.This extra large bag for slinging honey measures 50 x 36 cm and has a very fine mesh. The structure can be compared to a cheesecloth or pantyhose. The bag can be used both as a garland bag and/or as a draining bag. During unsealing, beeswax seals come off the top side of the comb. You put these in the bag and hang the bag on the inside of the garland....View more -
Lever gray Logar
€ 44,95 In stock and available for immediate delivery.Gray lever with handle for the Logar honey slings.View more -
Lever blue BeeFun®
€ 43,95 In stock and available for immediate delivery.Lever for the BeeFun® honey garland. Did your lever break or are you in need of replacement? Then you can order a loose spare honey crank lever here.View more -
Lever red LYSON
€ 39,95 In stock and available for immediate delivery.Red lever with handle for the Lyson honey garland. Made of aluminum and powder coated. This honey crank handle / lever comes with a pin for attachment.View more -
Set of lids Saf crank 420 mm
€ 54,95 In stock and available for immediate delivery.Set of two transparent lids, for the Saf honey crank of 420 mm. The set thus consists of two "half" lid parts.View more -
Lid Ø520 mm honey crank BeeFun®
€ 27,45 In stock and available for immediate delivery.Spare lid for a BeeFun brand honey garland with a diameter of Ø500 mm. Dimensions of the lid are 520 mm x 215 mm. The dlids come without screw holes and are made of PET-G, a super sturdy plastic that is easy to drill your own holes in the right place. An almost indestructible lid. Price is per half moon. If you need 2 lids then order this product 2x.View more -
Lid Ø420 mm honey crank BeeFun®
€ 22,95 In stock and available for immediate delivery.Spare lid for a honey garland of the brand BeeFun with a diameter of Ø400 mm. Dimensions of the lid are 420 mm x 170 mm. The lids are supplied without screw holes and are made of PET-G, a super sturdy plastic in which you can easily drill your own holes in the right places. An almost indestructible lid. Price is per half moon. Do you need 2 lids then...View more
Showing 1 - 43 of 43 items