Sublimox APF-PLUS

The Sublimox is a device for easily administering oxalic acid vapor in the hive. It keeps the oxalic acid at a constant, correct temperature, ensuring only oxalic acid vapor is released and no formic acid gas is produced. The Sublimox is connected to 230V. Operation is simple: place a cap with oxalic acid upside down on the device. Then turn the device over and the vapors come out of the unit. Let them disperse into the hive; this takes just 25 seconds.

This Sublimox set is supplied complete with:

• Heating element with handle and automatic temperature control
• Two caps for applying oxalic acid
• 3 m cable for connection to the heating element
• Bag or case for transport
• CE certified

We recommend using a half-face respirator when working with oxalic acid vapors and always working with the wind at your back. The Sublimox can also be connected to a 12 to 230 volt inverter of at least 300 W (not included!).

When using plastic hives or a plastic bottom board, it can be helpful to make a small slat. Drill a hole in it that the Sublimox tube fits through exactly. You can then place this at the entrance, which prevents the hive from melting because the tube cannot touch the hive body.

The Sublimox also works on a standard car battery of 55–60 Ah or more. You will need to connect an inverter capable of at least 300 watts. With a full battery you can work for about one and a half hours.

Note that when using a battery the cable must not be longer than 10 meters. For use over a longer distance, a custom (two-core) cable with thicker conductors is necessary (for example 2.5 mm2) to prevent excessive voltage drop.

Note: we advise not to use the Sublimox with beehives made of EPS material, as this may cause damage.