Castellated frame spacer for 10 hive frames in simplex size. Available in aluminium or 1 mm galvanised steel. Select your material in the dropdown.

Specifications: 26 mm high and 383 mm long.

These castellated frame spacers are suitable for hive frames with a maximum top bar width of 22.3 mm.

The frame spacers are supplied without nails.

Tip: [product id=1051]special thin nails[/product] for the frame spacers.

Please note: the price is per piece.

Frame spacer strip for 11 frames, simplex size. Available in both aluminium and galvanised. Select your material in the dropdown.

Specifications 26 mm high and 383 mm long.
The spacer strips are supplied without nails.

These spacer strips are suitable for frames with a maximum top bar width of 22.3 mm.

Tip: [product id=1051]special thin nails[/product] for the spacer strips.

Note: the price is per piece.

These frame spacers, also known as spacer strips, are made from a full 2 mm-thick aluminum. With this spacer you can easily space 10 frames evenly across the beehive. These extra-thick frame spacers are suitable for simplex frames. These strips fit both the spaarkast and simplex inner boxes.

Specifications: 26 mm high and 383 mm long.

These frame spacers are suitable for frames with a maximum top bar width of 22.3 mm.

The frame spacers are supplied without nails.

Tip: [product id=1051]special thin nails[/product] for the frame spacers.

Note: the price is per piece.

These castellated frame spacers, also called spacer strips, are made from a full 2 mm thick aluminium. With this strip you can easily hang 11 hive frames, precisely spaced, in a brood box (brood chamber) and/or honey super of the hive. These extra-thick spacer strips are suitable for simplex frames. These strips fit both the spaarkast and the simplex inner boxes.

Specifications 28 mm high and 386 mm long.

These castellated spacers are suitable for frames with a maximum top bar width of 22.3 mm.

The spacer strips are supplied without nails.

Tip: [product id=1051]special thin nails[/product] for the spacer strips.

Note: the price is per piece.

Bag with 7 g (approx. 25) nails. With these special thin iron nails you can mount 2 frame spacer strips (10- or 11-frame) or 4 spacer strips (6-frame). These nails are exactly the right thickness.

How do you prevent the wood from splitting during installation?
Place the nail head across the wood grain at the spot where you want the nail. Give a light tap with the hammer to break the grain.
You can of course pre-drill a small hole as well. You can then easily fasten the spacer strips.

Aluminum 10-frame hardware set for the Segeberger hive. Each set includes two aluminum corner strips (38 mm) and two 10-frame aluminum spacer strips. This is sufficient for one brood box (brood chamber) or one honey super.

This hardware is suitable for hive frames with a maximum top bar width of 22.3 mm.

11-frame galvanised frame spacers, also called spacing strips or spacers. This size is suitable for 11-frame Belgian simplex hives of 46 x 46 cm. The spacers ensure the hive frames hang neatly at exactly the same spacing in the hive.

These spacers are suitable for frames with a maximum top bar width of 26 mm.

The spacing strips are supplied without nails. Tip: [product id=1051]special fine nails[/product] for the spacers.

Note: the price is per piece.

Set of 2 aluminium 11-frame spacer strips for the Spaarkast polystyrene BeeFun including 12 screws for mounting. This set ensures your hive frames are perfectly spaced in the hive.

Specifications: 26 mm high and 399 mm long.

These spacer strips are suitable for frames with a maximum top bar width of 22.3 mm.

Aluminium frame spacer strip 11-frame, specially for the BeeFun polystyrene spaarkast. With these spacer strips you can easily hang 11 hive frames at perfect spacing in your polystyrene beehive.

Note: screws are not included.

Specifications: 26 mm high and 398 mm long.

These spacer strips are suitable for hive frames with a maximum top bar width of 22.3 mm.

Note: the price is per piece

Screws (12 pieces), made of hardened steel, for mounting 2 frame spacer strips (assuming 6 screws per spacer strip) in the BeeFun polystyrene beehive. Each spacer strip has 12 holes in total, so for extra strength you can also use 12 screws per spacer strip.

These screws require a Torx T10 driver. If you don’t have one, you can find it [product id=3179]here[/product].