Small honey filling table, model Easy, ideal for a small apiary and easy for one person to operate. This filling table is extremely convenient thanks to the digital controls and ensures a fast process when filling honey jars.

Dimensions of the complete setup:

• Length: 81 cm
• Base width: 50 cm
• Height: 63.5 cm
• Turntable diameter: 60 cm

The filling machine consists of:

• Honey pump
• Foot pedal
• 1.5 m hose
• Fitting to connect the hose to the pump
• Hose clamp

Features of the honey filling table:

• Low-speed pump with silicone impeller
• Digitally controlled
• Fills approximately 350 jars of 500 g per hour (depending on honey type and viscosity).
• Filling accuracy +/- 1 g
• Filling range from 10 g to 45 kg
• Can be used as a pump
• All parts in direct contact with honey are made of stainless steel or food-grade plastic approved for food contact
• 230 V / 200 W

Note: this machine is only suitable for round honey jars.

Honey filling machine for dosing and transferring honey. Ideal for filling honey jars. Fills around 350 jars of 500 g honey per hour, with a filling range from 50 g to 45 kg. All parts that come into contact with honey are made of stainless steel or food-grade plastic. The unit runs on 230V / 180W.

The warranty period for this machine is 2 years.

This machine includes the following components:

• stand
• dosing sensor (also works without foot pedal)
• voetpedaal
• user-friendly menu
• self-priming low-speed pump
• 1,5 meter slang
• slangenklem
• connector voor het aansluiten van de slang op de pomp

Tip: Don’t forget to add the [product id=1531]adapter[/product] to your order if you need it.

Stainless steel filling table for bottling honey jars. This table is equipped with an automatic turntable. Per hour, around 350 jars of 500 g can be filled. Thanks to the highly efficient automatic control, the machine has a filling range of 50 g to 45 kg. This filling table is easy to move thanks to the wheels. All parts of the machine that come into contact with honey are made of stainless steel and/or food-grade plastic. Once you’re used to this table, you’ll never want anything else!

Specifications:

• Material: stainless steel
• Computer-controlled
• Filling accuracy of +/-1% from 0 g to 1200 g and +/-1.5% above 1200 g
• Filling range: 50 g to 45 kg
• Can also be used as a pump
• Power supply: 230V / 300W
• Automatic control
• Low-speed self-priming silicone impeller pump

Warranty period: 2 years

Note: this machine is only suitable for round honey jars.

This heated tank, made of stainless steel, is designed so a constant honey temperature can be set during filling. This unit consists of 2 separate chambers of 150 liters each for heated honey. Each chamber has a 6/4 inch ball valve and an electronic level sensor that stops the pump upon reaching the desired quantity. The tank dimensions are L x W x H: 180 x 107 178 cm.

The special feature of this filling machine is that, thanks to the two separate storage chambers, you can heat 2 types of honey at the same time.

Specifications:

• Capacity: 300 L
• Voltage: 230V / 400V
• Heating power: 1 kW
• HC-01 temperature controller

Warranty period: 2 years

Holder made of stainless steel for hanging on a tank. The hose pass-through diameter is 4 cm. This holder keeps the honey hose securely positioned inside the tank.

Dimensions of the complete setup:

• Length: 81 cm
• Base width: 50 cm
• Height: 63.5 cm
• Turntable diameter: 60 cm

The filling machine includes:

• Honey pump
• Foot switch
• 1.5 m hose
• Connector for connecting the hose to the pump
• Hose clamp

Specifications of the honey filling table:

• Voltage: 230V
• Wattage: 365W
• Filling range: 50 g to 45 kg
• Filling speed: 350 jars of 500 g per hour
• Filling accuracy: +/- 1% from 0 g to 1200 g and +/- 1.5% above 1200 g

Honey filling machine for automatically filling your honey jars. With this device you can dose and transfer the honey. The primary function of this device is filling honey jars. During the process of stirring the honey, it reaches the right consistency. By continuously pumping the honey for several days you can achieve the desired consistency. Thanks to this process, the honey will remain free-flowing for many months. The duration of the process depends on the type of honey, ambient temperature, and the moisture content in the honey. All parts that can come into contact with the honey are made of stainless steel (RVS), acid-resistant and food-safe materials.

Tip: measure the moisture content in your honey with the [product id=1838]refractometer (2428)[/product]

Pneumatic bottling valve for the 30, 50 and 70 liter honey tanks. The valve connects to an air compressor (or similar) and can then be operated with a foot pedal. This keeps your hands free when filling honey into jars. Made of stainless steel and fits the 38 mm (6/4") honey gate.

This dosing valve fits 50, 70 and 100 liter honey tanks.

Stainless steel holder for hanging on a tank. The hose pass-through is 5 cm in diameter. This holder keeps the honey hose securely in the tank.